How Much Water to Use in an Egg Cooker
The water decides the result. Here's how to get it right.
JCBy the JoyhnnyCooker team · Updated

The short answer
In an electric egg cooker, fill the measuring cup to the soft, medium or hard line and pour it onto the heating plate. The amount of water sets the cooking time: when it has all turned to steam, the cooker switches off. More water means a longer cook and a firmer yolk.
Water level chart
| Result | Water | Typical time | Yolk |
|---|---|---|---|
| Soft | Soft line | 6–8 min | Runny |
| Medium | Medium line | 10–12 min | Jammy |
| Hard | Hard line | 12–15 min | Fully set |

Joyhnny Egg Cooker: 3 Egg Cookers
$99.99 $299.94 · 30-day guarantee · ships to US & Canada
Does the number of eggs change the water?
Hardly at all. Steam surrounds every egg, so one egg and seven eggs cook in roughly the same time. Use the same line. That surprises a lot of people, and it's the most common cause of overcooked single eggs.
When to adjust the water
- Jumbo or extra-large eggs: add a small splash above the line
- Eggs straight from the fridge: add a little extra, or let them sit 10 minutes
- High altitude: water boils at a lower temperature, so you may need a bit more
- Your preference: a few millimetres above or below the line fine-tunes the yolk
Lost your measuring cup?
Use any small measuring cup and start with a little less water than you think for soft eggs. Note what works, then repeat it. Electric egg cookers generally use only a few tablespoons for soft eggs and roughly double that for hard. The included cup takes away the guesswork, so it's worth keeping safe.
Hot or cold water?
Start with cold tap water. Hot water reaches a boil sooner and shortens the cook, so the lines won't match what you expect.
Common water mistakes
| Mistake | Result | Fix |
|---|---|---|
| Too little water | Runny, undercooked | Fill exactly to the line |
| Too much water | Rubbery, green ring | Use a lower line |
| Hot water | Shorter cook | Use cold water |
| Hard water | White spots on the plate | Vinegar wipe |
See the full how-to guide, hard-boiled eggs guide or the manual.
Our experience
We used to add extra water 'just in case'. That's how we got rubbery eggs. Filling exactly to the line and using cold water fixed it.
Pros and cons
What we like
- Water sets doneness automatically
- Same line for 1 to 7 eggs
Watch out for
- Needs small adjustments for jumbo or cold eggs
- Hot water throws off the timing
Not the best fit if: You don't want to measure anything
Frequently asked questions
How much water do I put in an egg cooker?
Fill the measuring cup to the soft, medium or hard line and pour it onto the heating plate.
How much water for hard-boiled eggs in an egg cooker?
Use the hard line. It usually takes around 12–15 minutes.
Do I need more water for more eggs?
No. Use the same line for one egg or seven.
Should I use hot or cold water?
Cold. Hot water shortens the cook time.
What if I lost the measuring cup?
Use a small measuring cup and start with less water for soft eggs. Adjust, then repeat what works.
Why are my eggs rubbery?
Too much water. Use a lower line and cool the eggs in ice water right away.
Today's bundle prices
Secure checkout on the merchant's site · 30-day guarantee · Ships to US & Canada
Final shipping cost and payment options are shown on the checkout page before you pay (USD).
Prices checked Nov 20, 2026 and may change. Independent site; we may earn a commission.
The JoyhnnyCooker team
We own and use the Joyhnny Egg Cooker in our own kitchen. This is an independent guide for home cooks in the US and Canada, with plain-English instructions and prices checked against the merchant's checkout. We're not the manufacturer.
Keep reading
- How to use & cook timesStep-by-step use, cook times, cleaning
- Manual & instructionsManual, water chart, troubleshooting
- Egg steamerWhy steamed eggs peel easier
- Hard & soft boiled eggsPerfect hard and soft-boiled eggs
- Where to buy (US & Canada)Best place to buy in the US & Canada
- Joyhnny Egg Cooker priceEvery bundle price, per unit
